Computer Station Nation is reader-supported.
When you buy through links on our site, we may earn an affiliate commission. Learn more.
If you have been using PCs for a while, you likely have an old hard drive from previous computers sitting around. If you ever need to get at the data on an old drive, there’s an easy way to do so without mounting the drive inside your PC.
These days gone are the hassle of old hard drives. There’s hardly a geek around, or even casual computer owner for that matter, that doesn’t have a few old drives stowed away.
If you ever need to get the data off an old drive or just want to check the drive and maybe erase it before disposal you could always crack open your PC and mount the drive inside. But that’s a lot of work to solve a temporary need. There are much better solutions around these days with the USB universal drive adapter kits available those days are far behind us.
Our Top 3 Picks For USB Universal Drive Adapter Kit
- Our Top 3 Picks For USB Universal Drive Adapter Kit
- NewerTech Universal Drive Adapter Kit
- Vantec USB 3.0 to SATA/IDE Adapter
- Unitek Drive Adapter
NewerTech Universal Drive Adapter Kit
5 Gbps High Speed Output USB Universal Drive Adapter Kit
The NewerTech USB Universal Drive adapter is the perfect tool to access bare drives via USB – without opening a computer or drive enclosure. Compatible with nearly any 2.5″, 3.5″, or 5.25″ drive. It’s the go-to access tool for working with bare IDE, ATAPI, and SATA drives.
One USB port for multiple drive interfaces makes it the ultimate bare drive tool for any well-prepared IT pro or creative. Small enough to travel, or tuck away in a drawer, it’s ready whenever you need plug and play data access to any bare drive. The USB Universal Drive adapter is the must-have universal drive access tool.
Some Hard Drives are harder to get to work because of the makeup of the adapter. contact while using the NewerTech Universal Drive Adapter USB Bare Drive Adapter. The manual could be more precise in showing how to use the adapter for different hard drives. If you are looking for a universal adapter to use as an external drive. This one will work.
Pros and Cons
- User-friendly design
- 5Gbps High-Speed Outputting
- Worry-free service
- Cannot work without an external power unit
- .Cable does not provide enough power to run a 3.5″ desktop disk drive
Vantec USB 3.0 to SATA/IDE Adapter
3.0 USB Universal Drive Adapter Kit
This universal adapter allows give you the ability to connect up to any 2.5″ or 3.5″ drive into a computer which then allows access you to access the contents of your disk drive. The adapter is compatible with windows operating system, Linux and Mac OS version 8.6 and above.
Moreso, USB 3.0 to SATA/IDE Adapter enables users and computer technicians to find exactly what they need to handle their problems. This is made possible because of its complete features which make them good in swapping disks.
For instance the, data throughout is greatly enhanced by the USB 3.0 which hits speeds of up to 5Gbps. The actual speed can be subject to changes depending on the settings on the host device.
Interestingly, a rare addition that comes with a USB 3.0 to SATA/IDE Adapter is the automatic sleep mode if it is inactive for half an hour. You will be able to know when the adapter enters sleep mode by checking on the LED lights which show power and activity status.
Pros and Cons
- The versatile adapter supports both 2.5in/3.5in SATA and IDE hard drives
- USB 3.0, for fast access to external storage at up to 5Gbps
- Backward compatible with USB 2.0 and 1.1
- Static discharge
- Lacks airflow
Unitek Drive Adapter
IDE And SATA Supported USB Universal Drive Adapter Kit
Super speed of up to 6Gbps can be reached when using Solid State Drive. With Hard Disk Drive you will enjoy speeds of up to 5Gbps. Swapping with Unitek is easier. You don’t need drivers and software to get rid of your internal drive and have it replaced with another one.
The equipment also has an LED light that is tailored to notify you about the activity status and also about the power. This piece is suitable and convenient for IT Engineers, technicians, schools, and also for home use. You can have simultaneous read and write with either an SATA docking station or dual SATA docking. If you have SATA and IDE types of hard drives, then you can read and write three drives simultaneously.
Pros and Cons
- Allows one to connect a removed internal hard drive to their computer
- works great for both IDE and SATA drives.
- A cost-effective way to gain access to old hard drives.
- Manual lack much of the setup information
- Does not work with 3.5″ HDD drives
Finally, this is not a kit for “techies” who don’t know what they are doing. You must follow the standard HDD installation sequence by first having the USB cable connected, then connect the SATA/IDE cable and then lastly connect the power.
Have the drive level or flat. All the connections fit snugly without coming loose and the colored lights on the main unit tell you what devices are getting power.
This product works great for accessing various HD types (SATA and PATA) and sizes (2.5″, 3.5″, and 5.25″). Don’t move it around or even roughly handle the HDD when powered up, you can damage the drive or damaged sectors.
It works pretty well, instructions are quite basic but it is straightforward to use anyways. If the drive is dead in your computer, this won’t make it work, which should not be held against the product.
It does what it is intended for, even useful for using old drives around your house to store data on. We would recommend the Universal drive adapter 3.1 Gen 1 product because if you ever have a dying drive, it will allow you to recover files externally and without your machine is at the mercy of your dying drive. To view more options, visit Amazon.com