Computer Station Nation is reader-supported.
When you buy through links on our site, we may earn an affiliate commission. Learn more.
The Central Processing Unit (CPU) is a principal part of a computer and it composes of main memory, control unit, an arithmetic-logic unit. It is the heart of the computer hardware and it is linked with input and output devices and auxiliary storage units.
The CPU is contained on an integrated circuit chip called a microprocessor. It regulates the operations of the computer. It receives data from the main memory and interprets them in order to activate other elements of the computer at the appropriate moment to perform their respective operations.
A liquid CPU cooler is where a liquid circulates liquid through small pipes in a heat sink, drawing heat from the CPU to a dedicated radiator located on the system case or enclosure, where it is released into the ambient air outside of the system.
Our Top 3 Picks For Best Under 50 CPU Coolers
Hyper 212 Evo v2
120 MM Fan CPU Cooler Under $50
The Hyper 212 Evo v2 one of the most budget CPU coolers because it is simple, and it gets the job done. It is perfect if the user doesn’t have any intentions of extreme overclocking.
It’s also a good option to have for test builds. It has a standard design with no RGB and no eccentricity. The heat block has 4 direct contact heat pipes and CDC (Continuous Direct Contact) for the best heat conduction.
The user can also install a second fan, and use it in a push or pull configuration to further enhance the cooling performance. The cooling fan does not offer RGB/RGB lighting.
A set of four copper heat pipes provides the cooling power for the Hyper 212 EVO v2, which are integrated with the aluminum mounting plate and milled flush for CPU IHS direct contact.
The underside of the mounting block shows the securing clips for the tension mounting screws as well as the heat pipe integration into the cooling fin stack.
It can use a steel straightedge for comparison. The base of the cooler mated well with the face of the Intel Core i9-10850K CPU IHS which provides a quality thermal compound spread and it shows a consistent contact across the entirety of the processor with all four heat pipes directly interfaced.
Pros and Cons
- It supports a second 120MM fan.
- It is reliable.
- It is better than a stock cooler.
- The fans rattle at higher RPMs.
- It is suitable for entry-level CPUs.
Deepcool Gammaxx GT BX
RGB Lightning CPU Cooler Under $50
The Deepcool Gammaxx GT BX is a CPU cooler that works with most AMD and Intel sockets. It has RGB, so if the user is going for an RGB-orientated build, this cooler is a good option. It also has high-quality CPU cooling optimized for heat dissipation.
It is a solid all-rounded CPU cooler that has aesthetics, compatibility, and performance. The heatsink is quite robust, it features 0.5mm thick aluminum fins and 4 heat pipes on both sides which makes 8 in total. The CPU cooler shows bright & vivid RGB lighting, and the lights illuminate from the fans. Also, On top of the heatsinks, there is a cool logo that lights up with the RGB lighting.
The cooler comes with a controller that allows the user to cycle through the RGB presets and if the user has an RGB compatible motherboard, the user can sync it to everything else.
It provides decent performance out of this CPU cooler due to its efficient and effective heatsink design. It can also be used for slight overclocks. Also, the fan is decent. The installation is simple, the user just needs access to the back of the motherboard to install the cooler.
Pros and Cons
- It has RGB lighting.
- It has decent thermals.
- Simple installation.
- The fans can get loud.
- The brackets can be frustrating.
Darkflash Shadow PWM
Unique Style CPU Cooler Under $50
The dark flash shadow PWM is a unique-looking CPU cooler that features a top-down design. It has addressable RGB which means the user can control every LED individually. The cooler is also decent for SFX builds due to its top-down nature.
The ring RGB design really goes well, and since the LEDs are addressable, the user creates some cool effects with the lights. It is a slim and small form factor builds. The user can definitely run the processor at clock speeds, and use it for slight overclock depending on the overall cooling.
Pros and Cons
- It has a unique style.
- It is suitable for SFX to build.
- It has addressable RGB.
- The cooling performance is low.
- Frustrating installation.
All input information is transferred via the main memory to the arithmetic- logic unit involving the four basic arithmetic functions and specific logic operations.
A CPU cooler is a device designed to draw heat away from the CPU and other components of the computer. The computer uses a CPU cooler to lower CPU temperatures improves efficiency and stability of the system and can increase the overall noise level of the system.
There are two types of CPU coolers, they are air CPU coolers and liquid CPU coolers. Air CPU cooler may consist of a heat sink or a combination of a heat sink and fan.
A heat sink is a component of the computer that is designed to lower the temperature of an electronic device by dissipating heat into the surrounding air.
An additional fan mounting hardware is included for users seeking to add an additional fan to the Hyper 212 Evo v2 for push/pull airflow, a PWM splitter for dual fan operation, and a syringe of thermal compound to round out the boxed accessories.
It has a milled aluminum mounting block is fixed to the heat pipes which provides relief from the struggles of installing with the adjustable swing arm mount.
The cross-section of the cooling tower reveals offset heat pipes and an ‘open’ fin stack which allows airflow to escape at any angle. The milled aluminum base has aggressive saw-tooth milling that allows it to function not only as a mounting plate but also to aid as additional thermal dissipation and it has tension mounting screws that are maintained with washer clamps.
All these make it the best under 50 CPU coolers available in the market. To see more options, visit Amazon.com