Computer Station Nation is reader-supported.
When you buy through links on our site, we may earn an affiliate commission. Learn more.
Any computer can edit a simple video, even a smartphone. However, for serious movie making, you’re going to need to step it up a notch especially with 4k, 6k, and even 8k video, a person will need a computer that can handle and process such a quantity of information. One way to choose a video editing computer is to first decide what video editing software you prefer.
Some factors must be considered in choosing RAM for video editing, they are the clock speed, CAS latency, and the heatsink. The clock speed is the main deciding factor in a RAM as more clock speed means that the tasks will be done faster.
Our Top 3 Picks For Best RAM For Video Editing
Corsair Vengeance LPX
Two Cooling Fan Ram For Video Editing
The Corsair Vengeance LPX is one of the best RAM kits available in the market today. Corsair is the first DRAM retailer to bring DDR4-5000 to market. It is made up of Micron 8 Gbit Revision E chips and each of those chips is used with Corsair’s custom 8-layer PCB and cooled with anodized aluminum heat spreaders.
Corsair low-profile, non-RGB Vengeance LPX design and has a Vengeance Airflow fan to provide effective cooling. The memory kit is designed for high-end Ryzen 3000 processors equipped with X570 motherboards.
The memory kit comes with a single XMP 2.0 profile which is for 5000 MT/s, with latency timings of 18 – 26 – 26 – 46, and has an operating voltage of 1.50 V.
It comes with Vengeance LPX heatsinks which have a height of just 31 mm and it is great for cooler compatibility as these memory sticks will fit under most CPU air tower coolers. It uses an 8-layer PCB design which is impressive and is likely a reason why it is capable of reaching DDR4-5000 in a low profile kit.
With DDR4-5000, the de-rated infinity fabric runs at 2500 MT/s, which is a lot nearer to the default running speed than most. Of course, there are still benefits to running the DRAM this fast, so those are not discounted. Ryzen works great with higher-speed memories, and the best part is that this RAM is actually one of the more affordable options, so it will work great.
Pros and Cons
- It has a high speed of 3,200 MHz.
- It comes with two cooling fans.
- The cooling fans are great for both RAM and motherboard.
- The manual overclocking beyond 1.35v does not work properly
- It doesn’t have RGB LEDs
CAS Latency Ram For Video Editing
The Gigabyte Aorus is one of the best RAM for video editing and has one of the best speed and CAS latency. The Gigabyte Aorus comes in both 8GB and 16GB sizes. It has Anodized Gun Metal Gray Aluminum Heatsinks with RGB Diffusers which dissipates heat.
The RGB is controllable through a dedicated application that can customize the RGB lights with multi-zone lighting. The memory can be boosted up to 3733 MHz with the formats that it supports and the Clockspeed goes up to 4000MHz.
Pros and Cons
- It has one of the best speed and CAS latency
- It has up to 16GB of stick sizes.
- It has Anodized Gun Metal Gray Aluminum Heatsinks with RGB Diffusers.
- It can be costly
- It has an O. C limit due to hardware and software implementation
Kingston HyperX Predator Black
Ram For Video Editing
The Kingston HyperX Predator Black has a black exterior with high overclocking capability and a built-in heatsink. It is one of the great RAMs in the market today.It produced by Kingston, the HyperX Predator Black has overclocking speeds starting at 2400MHz and builds up until 3800MHz which is not common for most DDR4 RAM cards. The power consumption is very low too at 1.35V.
The RAM modules come in three different capacities of 4, 8, and 16 GB which the user can choose to combine in either a dual or quad-channel to set up to achieve capacities of up to 128 GB.
It was mainly developed for the Intel 9 series but it is compatible with the 10Gen intel and 4th Gen Ryzen processors. The dense heat spreader wrapped in black aluminum provides maximum heat dissipation to optimize reliability.
Pros and Cons
- Low power consumption
- It has an aluminum heat spreader
- It is fast
- It is expensive
- It has a small file transfer speed
Video editing is highly dependent on having a computer whose speeds are fast, and performance can support both the video editing activity as well as the software required for video editing.
The evolution of operating systems such as Windows 10 and macOS Mojave that require lots of memory demands that your RAM capacity is not substandard.
Having enough RAM is very important for video editing. If the user is editing a video at 1080p, it is essential to use 8 GB RAM at the absolute minimum. For 4K, it better to use at least 16 GB RAM.
The Corsair Vengeance LPX is the best RAM for video editing on the market today although most gamers also prefer it with the memory modules coated with plain, slatted heatsinks made of solid aluminum, and they’re low-profile and the DIMMs are some of the smallest that exist.
It is designed around performance rather than aesthetic features which makes it run at a speed of 3200MHz. The single-threaded bandwidth figure of 15.45GB/sec is one of the best here, and its global latency result of 28.9ns.
The lack of RGB LEDs means there’s more room in the budget to make the memory faster, and the smaller design means it will be easier to install chunky cooling hardware without the memory getting in the way.
This kind of design certainly goes against the current trend for big sticks of memory with plenty of lighting, however, it is better to forego RGB LEDs if it means the memory will be quicker and more reliable which makes it the best option for video editing. For similar products, visit Amazon.com.